Wood Plastic Decking Floor

Wood Plastic Decking Floor
Model No.: LSHD
Export Markets: South America, Eastern Europe, Southeast Asia, Oceania, MID East, Eastern Asia, Western Europe
Additional Info.
Trademark: Lvsen Vdi
Packing: Plastic Weave
Standard: 150x25mm
Origin: China
HS Code: 39259000
Production Capacity: 10000 Ton/Year
Product Description
The Eco-friendly composite decking/ outdoor decking/ flooring/ WPC decking we produced is made of:

30% HDPE (Grade A Recycled HDPE)
60% wood fiber (Professionally treated dry wood fiber)
10% chemical additives (Anti-UV Anti-oxidation, stabilizers, colorants, anti fungus, coupling, reinforcing)

This material is extruded by professional Wood-plastic extruding machine under high temperature and pressure, so it is a kind of insect proof, green environmental responsible material.

The main features of this material is as following:
1. 100% recyclable, eco-friendly, saving forest resources
2. With the look of the natural wood but no timber problems
3. Water resistant, no rotten, proven under salt water condition
4. Barefoot friendly, anti-slip, no cracking, no warping,
5. No painting, no glue, low maintenance
6. Weather resistant, suitable from minus 45 degree to 60 degree
7. Insects, and moldy-proof
8. Available in different colors
9. Easy to install and clean

Steps:

1 Measure the deck for the first decking plank.
2 Cut the plank to length with a circular saw or power miter saw.
3 If necessary, use a jigsaw to cut a hole in the plank for the downspout.
4 Set the plank onto the deck, and use a putty knife to slip it under any existing metal flashing.
5 Measure to ensure the first deck board is parallel with the outer edge of the deck.
6 Fasten the deck board with composite decking screws along the edge closest to house; Drive one screw into each joist.
7 Install a hidden fastener into the edge of the deck plank, placing one at each joist.
8 Use plastic tapping block and hammer to drive the sharpened spikes of the fasteners into the edge of the plank.
9 Use drill/driver to drive one screw through each hidden fastener and into the joists.
10 Cut the second decking plank to length and set it against the hidden fasteners in the first plank.
11 Use the 2x4 tapping block and sledgehammer to drive the second plank into the sharpened spikes protruding from the hidden fasteners in the first plank.
12 Continue laying planks in this manner across the deck.
13 At outer end of deck, notch the decking, as necessary, to fit around the railing posts.
14 To install last plank, used end nippers to remove the spikes from one side of hidden fasteners.
15 Install last plank with composite decking screws.
16 Snap chalk line across deck boards.
17 Screw a straight-edged board to deck to act as a saw guide.
18 Guide a circular saw along the straight-edge board to trim deck boards to length.